There are Calix offices and partners all across the globe.

To find one near you, and visit our regional websites - select your region below.

Application of ACTI-Mag in mine water

for acid neutralisation in Central NSW

Talk to us
With Calix’s ACTI-mag, a mine in Central NSW neutralises the water and precipitates any heavy metal contamination within the water for use within their froth flotation process, for the extraction of precious metals.

case study summary

  •  Drought resulted in a low water table, exposing Potential Acid Sulphate Soils (PASS).
  • Mine pit water had become very acidic due to the falling water table.
  • Fresh water for the process was in short supply, at 2% storage capacity, alternative supplies needed to be sourced.
  • The local council had given the mine site an ultimatum about the use of town drinking water in the minerals process.
  • Water recycling within a flotation process
  • Recycling water during drought
  • Reducing costs compared to caustic soda
  • Rehabilitating the mine pit
  • pH Neutralisation of pit water

Download Success story

ACTI-Mag application to the water that had accumulated in the pit allowed for a pH adjustment.

This allowed the mine site to neutralise the water and precipitate any heavy metal contamination within the water for use within their froth flotation process, for the extraction of precious metals.

Download the PDF Now

Benefits of ACTI-Mag

Reduced the cost of pH neutralisation from the more expensive option of caustic soda (sodium hydroxide).

Better dispersion within the pit for consistent neutralisation within the whole water body.

Stronger alkalinity allowed the precipitation of heavy metal contamination before re-use.

Reduced the risk to people, equipment and the environment from dosing neat caustic soda into a pipeline.


Central NSW was suffering from a drought that was nearing five years long. All of the local water streams and rivers had dried up and the supply of potable water for the town was down to 2% storage capacity.

The water supply was a critical part of the operation of the mine site just outside the town. Their froth flotation process relies on water as a carrier to separate precious metals from other minerals within the crushed and ground rock.

Due to the dwindling water supply, the local council had asked the mine site to stop using the potable water supply that was also being used by the town for drinking water. A secondary pipeline from another body of water, also had no guarantee of supply due to the drought.

Fortunately, the mine site had an old underground mine and pit that had filled with rain and ground water over the ten years since it was last used. The ability to use this water was critical for the ongoing operation of the mine processing site.


Fortunately, the mine site had an old underground mine and pit that had filled with rain and ground water over the ten years since it was last used. The ability to use this water was critical for the ongoing operation of the mine processing site.


The mine site had an existing plan to treat and recycle the water, however they were surprised by the additional acidic load as a result of the water table falling. As the water table falls, more Potential Acid Sulphate Soil (PASS) is exposed and oxidised, which results in further acid being donated into the pit water.

Caustic soda was being used to neutralise the acid in the pit water. High concentration caustic soda has a density of 1.5 g/cc which seemed to cause the caustic to drop to the bottom of the pond as it was being added. Due also to poor mixing, this resulted in zones of different pH within the pond.

Consideration had been given to diluting the caustic as it was added to reduce its density, however due to the heat of dissolution when mixing caustic and water within a plastic mine pipe, it was deemed too high risk to do this without significant investment in accurate dosing equipment. Another alternative was to spray the caustic over the pond, however this was ruled out because caustic can cause severe chemical burns. Other chemicals like soda ash and lime were considered.

These however would add undesired dissolved minerals to the water (hard water), rendering it unsuitable for re-cycling, as well as being cost prohibitive.

The use of water in mining is a sensitive topic.

Maximising the value of alternative sources and wastewater is crucial.


Calix was able to provide a rapid solution in the form of ACTI-Mag for acid neutralisation. ACTI-Mag is a high surface area magnesium hydroxide product. It is non hazardous, non-toxic and has a very low solubility, which makes it perfect for acid neutralisation while maintaining the water quality for any kind of downstream use.

ACTI-Mag was able to be sprayed or pumped into the pond with good dispersion using an existing carry water line for dilution and delivery, which was not possible with caustic due to the heat of mixing.

In addition to treating the pit itself, Calix was able to set up a dosing rig to treat the water being pumped out of the pit, so that the water quality, including pH and alkalinity, was within specification while the pit was being treated. This allowed the immediate use of the water, instead of having to wait until the whole pond was treated.


ACTI-Mag turned out to be a very cost effective solution for the treatment of mine pit water, and other water that had been contaminated with acid.

Whether the acid was leached from the ground, or as a result of an industrial waste, the ACTI-Mag was able to make use of the high surface area to rapidly neutralise the acid contamination. There are plenty of alternative chemicals on the market that promise acid neutralisation, but there is nothing that delivers the results as quickly and as cost effectively as ACTI-Mag.

Minerals processing is core to the Calix business, so we understand that using an inferior product can result in additional risk or nasty side effects to your process that can cost you more than the product in the first place. Calix has the expertise to understand your process and analyse the risks.

So you can be confident you have made the right choice to maximise your core business.

Related stories

Improving the Sustainability of Water Treatment \ Wineries
Implementing a safe & cost effective alkali dosing solution

Calix introduced ACTI-Mag to a winery in Morquong NSW, as a safe and cost-effective alternative to ammonia for pH adjustment

Improving the Sustainability of Water Treatment \
Chrome Precipitation at a tannery, Casino Hide Tanners

ACTI-Mag is a highly reactive, concentrated and stabilised suspension of Magnesium Hydroxide manufactured by hydrating ultra high surface area Magnesium

Improving the Sustainability of Water Treatment \ Municipalities
Magnesium Hydroxide liquid dosing for odour control, Cassowary Coast Regional Council

Replace lime and alum with Calix’s ACTI-Mag magnesium hydroxide liquid at Cassowary Coast Region, QLD, Australia.

ACTI-Mag for Caustic soda replacement

While ACTI-Mag is typically more expensive then 50% NaOH on a “price per unit” basis, it is significantly less expensive in use – because every 1.0 kg of 50% NaOH can be replaced by 0.6 kgs of 60% Mg(OH)2 to provide the same number of moles of hydroxide (OH-) for pH neutralization.

Download the Solution Spec Sheet

Latest News

October 23, 2020 \ Improving the Sustainability of Water Treatment

IER is the Pacific Northwest manufacturer of this chemistry in a 60% Mg(OH)2 product called AMALGAM-60, with plant locations in Pasco and Centralia.

September 29, 2020 \ Improving the Sustainability of Water Treatment
pH & Alkalinity – How are they related?

This presentation provides a simple and solid understanding of pH and alkalinity, and how these parameters are so critical for the optimization of numerous wastewater treatment operations .

September 25, 2020 \ Improving the Sustainability of Water Treatment
Introducing John Van Wingerden

John enjoys giving proactive service to his own customers and leads business development of AMALGAM products for the wastewater industry.

Contact Us

Calix is committed to providing a high level of customer service. Whether you are looking for information relating to our solutions, have a comment, are looking for a new career, or want information on our performance, use the form below to get started.

Follow us on:

Get the latest news, customer stories, and R&D updates delivered to your inbox.

Looking for a safety data sheet (formerly known as MSDS)? All our SDS are available on our website.